Home / Firmware / Download Jiake P11 Firmware – Android Stock ROM

Download Jiake P11 Firmware – Android Stock ROM

 

Download Jiake P11 Firmware – Android Stock ROM

 

Are you on the lookout for the Stock ROM firmware in your tool Jiake P11? If sure your resolution, you might be at the proper web page. We now have given the direct hyperlink to download Jiake P11 firmware.

Download Jiake P11 Stock ROM from right here, flash it for your tool and benefit from the local Android revel in once more. The download record accommodates the USB motive force, flash device, and the scatter record.

Download Jiake P11 Firmware

Download Jiake P11 Firmware

Stock ROM Report Title: Jiake_P11_MT6580_5.1.zip
Stock ROM Report Dimension: 547 MB
Android OS Model: five.1

Download Now

How To Flash Stock ROM Firmware On Jiake P11

Step 1: Download the Stock ROM zip record given above and extract it for your laptop. You are going to in finding SP flash tool and Android scatter record after extracting.

Step 2: Now download Jiake P11 USB driver and set up it for your laptop. In case if in case you have already put in USB motive force for your laptop skip this step.

 

Download Ultimate UM500 USB Driver (official)

 

Step three: Subsequent, transfer off your Jiake P11 smartphone and take away the battery (it’s detachable).

power-off-android

Step four: Now pass to the extracted folder in Step 1 and open up the SP Flash Software sub-folder. You are going to in finding “Flash_tool.exe” record in it. Release it.

stock-rom-flash-process

Step five: As soon as SP Flash device is introduced, click on on “Download” tab.

stock-rom-flash-process-2

Step 6: Now, click on on “scatter-loading” button within the download tab.

stock-rom-flash-process-3

Step 7: Subsequent, click on on “Open Scatter Report” and make a selection the scatter record from Step 1. For reference see the picture given under.

stock-rom-flash-process-4

Step eight: Now click on at the “Download” button to begin the flashing procedure.

stock-rom-flash-process-5

Step nine: Subsequent, attach your Jiake P11 Android tool for your laptop via unique USB cable (with out battery – whether it is battery detachable) and press quantity up or quantity down button.

Step 10: The flashing procedure will start momentarily, and it’ll get finished in a minute or two. As soon as it’s over, you are going to see the “Download OK” inexperienced ring in SP Flash Software.

download-ok-green-ring

Step 11: Now, shut SP Flash device for your laptop and unplug your smartphone.

That’s it. Now you’ve got effectively flashed Stock ROM firmware for your Jiake P11 Android tool. If you happen to come across any problems whilst following this instructional, do let me know by means of feedback.

Check Also

Download Massive M1000 Firmware – Android Stock ROM

Download Large M1000 Firmware – Android Inventory ROM Are you on the lookout for the …

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: