Home / Firmware / Download Jiake N9100 Firmware – Android Stock ROM

Download Jiake N9100 Firmware – Android Stock ROM

Download Jiake N9100 Firmware – Android Stock ROM


Are you in search of the Stock ROM firmware to your tool Jiake N9100? If sure your resolution, you’re at the proper web page. We’ve given the direct hyperlink to download Jiake N9100 firmware.

Download Jiake N9100 Stock ROM from right here, flash it for your tool and benefit from the local Android revel in once more. The download record accommodates the USB driving force, flash instrument, and the scatter record.

Download Jiake N9100 Firmware


How To Flash Stock ROM Firmware On Jiake N9100

Step 1: Download the Stock ROM zip record given above and extract it for your laptop. You’ll to find SP flash tool and Android scatter record after extracting.

Step 2: Now download Jiake N9100 USB driver and set up it for your laptop. In case if in case you have already put in USB driving force for your laptop skip this step.

Step three: Subsequent, transfer off your Jiake N9100 smartphone and take away the battery (it’s detachable).


Step four: Now pass to the extracted folder in Step 1 and open up the SP Flash Device sub-folder. You’ll to find “Flash_tool.exe” record in it. Release it.


Step five: As soon as SP Flash instrument is introduced, click on on “Download” tab.


Step 6: Now, click on on “scatter-loading” button within the download tab.


Step 7: Subsequent, click on on “Open Scatter Report” and make a choice the scatter record from Step 1. For reference see the picture given underneath.


Step eight: Now click on at the “Download” button to begin the flashing procedure.


Step nine: Subsequent, attach your Jiake N9100 Android tool in your laptop via unique USB cable (with out battery – whether it is battery detachable) and press quantity up or quantity down button.

Step 10: The flashing procedure will start momentarily, and it is going to get finished in a minute or two. As soon as it’s over, you are going to see the “Download OK” inexperienced ring in SP Flash Device.


Step 11: Now, shut SP Flash instrument for your laptop and unplug your smartphone.

That’s it. Now you will have effectively flashed Stock ROM firmware for your Jiake N9100 Android tool. If you happen to stumble upon any problems whilst following this educational, do let me know by means of feedback.

Download Jiake N9100 Firmware

Stock ROM Report Identify: Jiake_N9100_MT6582.zip
Stock ROM Report Dimension: 535 MB
Android OS Model: four.four

Download Now

Check Also

Download Massive M1000 Firmware – Android Stock ROM

Download Large M1000 Firmware – Android Inventory ROM Are you on the lookout for the …

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: